[SOLVED] M-Audio USB MIDI interface cord not getting any signals

[Buzzy]

My M-Audio Uno USB MIDI interface cord is not getting any signals.  I just confirmed it works in Windows though, so the cord in not the problem.  I re-installed the midisport-firmware, but to no avail.

[GMaq]

Hi,

Have a look near the end of page 1 of this thread, there is an issue with mismatched udev rules in the midisport-firmware package included in AV Linux. Removing the midisport firmware rule as Root from etc/udev/rules.d/ will fix the midisport-firmware issue however whether that will solve your issue I can't say for sure.

Thread is here:
http://www.remastersys.com/forums/index.php?topic=274.0

[Buzzy]

That worked!  Turns out to be a cinch.

All I did was rename the following file and rebooted:

/etc/udev/rules.d/42-midisport-firmware.rules

to

/etc/udev/rules.d/42-midisport-firmware.rules.old

[Buzzy]

While on the subject, does LMMS recognize M-Audio or any other external midi interface devices?  Rosegarden does, Tuxguitar does, but can't get LMMS to and couldn't find any answers by googling it.

[varpa]

Look here: http://lmms.sourceforge.net/wiki/index.php/0.4:Using_MIDI

[Buzzy]

Look here: http://lmms.sourceforge.net/wiki/index.php/0.4:Using_MIDI

Thanks.

It looks like you can only choose to do this for each individual track.  I was hoping you could do it globally so I could use the General MIDI bank of my external synth module for the entire project.

[varpa]

I actually do not use LMMS, so I'm not much help.  You might try posting to the LMMS forum: http://sourceforge.net/apps/phpbb/lmms/