|
Main features of surface grinding machine
1>Casting party is made of M Hanna high strength cast iron, which is treated by special annealing and quaternary treatment with high precision and good rigidity.
2>Left rail is V type rail,right rial is flat rail,the front and back are double V type slideway, and process with the precision shovel,and have advantage of smooth and wearable,M250 type slideway with special resin, durable, good precision, flexible operation and portability
3>Spindle motor without vibration and low noise
4>Sleeve type grinding head spindle with high precision,using ultra precision P4 grade 4 precision angle of rolling bearings, through strict measurement after preloading, assembled in the room temperature, and with the labyrinth completely waterproof design, to ensure that the service life of the bearing surface, and precision grinding.
5>We can install digital display, electric automatic and frequency conversion equipment according to different requirements of customers
Standard configuration
1>Encryption of pure copper permanent magnetic chuck,
2>water tank and a water cooling system,
3>wheel flange and grinding wheel,
4>grinding wheel flange installation tools,
5>grinding wheel holder,
6>grinding wheel balancer,
7>balance wheel shaft,
8>a horizontal adjusting bolt and machine foot toolbox
9>practical tools necessary.
Main parameter
Model | L250AH | |||
Work table | Size(L*W) | mm | 530X250 | |
Front and back stroke | mm | 270 | ||
Left and right stroke | mm | 560 | ||
Left and right movement speed(stepless) | m/min | 3--20 | ||
Front and back feeding | Continuous (stepless speed regulation) | mm | 50--500 | |
Intermittent (stepless speed regulation) | mm | 1--20 | ||
Worktable type T groove (groove number * groove width) | mm | 1X14 | ||
Grinding head | Maximum distance from center line of grinding wheel to working table | mm | 460 | |
mm/min | ||||
Vertical feed handwheel feed | Handwheel per turn | mm | 0.15 | |
Handwheel per cell | mm | 0.01 | ||
Front and rear feed handwheel feed | Handwheel per turn | mm | 3 | |
Handwheel per cell | mm | 0.02 | ||
Grinding wheel shaft speed | r/min | 2850 | ||
Grinding wheel size (outer diameter * width * internal diameter) | mm | 200X16X31.75/32 | ||
working accuracy | The surface of the base of parallelism | mm | 300:0.005 | |
Surface roughness | m | Ra0.32 | ||
Weight machine | Net weight | kg | 1050 | |
Gross weight | kg | 1150 | ||
Motor power | kw | 2.94 | ||
Grinding head motor power | kw | 1.5 | ||
Size of machine(L*W*H) | mm | 1760X1380X1850 | ||
Size Of package(L*W*H) | mm | 1700X1150X1900 |
![]() |
L250AH METEL GRINDING MACHINE Images |