Oil Sludge Refining Plant
This machine can recycle waste oil sludge, oil residue,oil bags to
fuel oil and carbon black.
Qzone WeChat Facebook Twitter Print Favorites Pinterest LinkedIn AddThis 0Share
|Code:||*(marked *should be filled)|
First,the oil sluge goes into the two pretreament oil tanks to get
flocculation and sedimentation treatment. Add flocculant to one of
the tank then mix the oil with air flow. Then pump the oil to the
distillation reactor to heat the oil to 60℃. Then close the valve
of tank A, the oil in tank A starts its will flocculent settling.
5 hours later,after the flocculant has settled down,drove out the
flocculant and put it to the pretreatment oil tank B. Repeat the
steps of tank A. The flocculant can be used for more than ten times
and there will be no pollution of this. While the oil in tank B
getting precipitated,the oil in tank A could be distillated in the
evaporation machine . The oil would get heated in the pipes of the
distillation reactor and be pumped to the evaporation machine again
Oil turned into oil gas in the evaporation machine, and be sucked
to the condenser after the supply machine which can separate the
light oil gas . We can also get a little lightest oil in the tiny
tank under the supply machine. This part of oil could be used in
motor bikes,but this part is pretty little. Oil gas becomes refined
fuel after cooling and will be pumped into the temporary oil tank
to get next cooling.
The whole plant is working with micro negative pressure, which is
provided by the vacuum pump. The smoke of the whole progress will
get purged by the stormization sulphur dust collector.
3 T , 5 T, 10 T, 30 T ...
batch type and contnuous type
Avaiable raw material