Waste Oil Distillation Plant

Waste Oil Distillation Plant is self-shunt vacuum distillation unit, distillation system uses a tube furnace (independent research) heating the continuous distillation process under negative pressure to be waste oil distillation.Because the waste oil contains large amounts of water so we should dehydration before distillation.For example, the raw material ( like used engine oil) recovery is more than 90% when the water percentage is less than 5%.

Raw Material

Waste Oil Distillation Plant can be used for refining waste oil, waste engine oil, sludge, pyrolysis oil (tyre pyrolysis oil and plastic pyrolysis oil) and sump oil into qualified diesel fuel. And the diesel oil can be directly used in low speed engines and generators.

Waste OilRubber Crude OilTire Crude OilStraw Crude OilPlastic Carbon Oil

Production Process

In the process of waste oil distillation plant,The cold materials (waste oil) should be pre-heat exchanger with the overhead vapor phase component first.Materials after heat exchange into the falling film evaporator using secondary heating flue gas dehydration,and then through the tube furnace heating again after after the temperature meet the process requirements into ectification within the column Control reflux ratio at the same time, On the top of the gas phase components after heat exchange with the raw condensation receiving tank into the light components, To restructuring after restructuring of condensing tank,Tank bottom components into the slag,Non-condensable gas back into the tube furnace combustion after water seal.

Final Products And Application

Waste Oil Distillation Plant can purify waste tire oil, plastic oil, waste engine oil, the final diesel can be used for tractors, trucks, and diesel oil generators, ships etc.

Refined Mechanical OilRefined Rubber OilRefined Tire OilRefined Plastic OilRefined straw Oil

Technology Characteristics