Home > Kitchen Appliance Parts >

Drilling equipment DOWNHOLE MOTOR

Country/Region china
Company Beijing Orichem International Co. Ltd.
Categories Downhole Drilling Tools
ICP License Issued by the Chinese Ministry
  • Product Details
  • Company Profile

Drilling equipment DOWNHOLE MOTOR


The BPM downhole motor is a kind of drilling tools developed for converting hydraulic energy into mechanical energy through a conjugator of a stator and a rotor.The motors are usually divided into two kinds,single lobe (1/2) and multi lobes(N/N+1) motors,according to the quantities of the lobes of the stator and rotor.Generally apeaking,for motors of the same length of rotor/stator section,the ,ore are the lobes,the higher is the output torque,while the lower is the rotate speed,vice versa.The motors are usually used together with cone bits,diamond bits and so on in drilling operation,such as directional,vertical and horizontal drilling,correcting deviation,coring,reaming,sidetracking,ect.
BPM motors may also be equipped with extended power section.Comparing with common motors,they are greatly increased in output torque and power,which help to increase penetration rate markedly.For some kinds of motor,hollowed rotors are optional as well.It can reduce the rotation inertia,optimize meshing of rotor and stator,and decrease the vibration while running.If the rotor is equipped with a nozzle,it can increase waterpower of the bit.BPM screw drilling tool is equipped with high-temperature motor, which can enhance the reliability and continuous working time of high-temperature wells and deep wells; BPM air / foam drilling tool has superior air and foam drilling system, which can enhance the drilling speed of the machinery.
BPM dowm hole motor adjustable bent bousing is optional.It can easily adjust the angle from 0 to 3 degrees(between 0 to 3 degrees) in the rig floor without shim.
BPM down hole motor has patent anti-friction connecting rod.It obviously improves the capacity of the motor and also increases the running time.
BPM motors can epuip with patent sealed beraing assembly.which improves its load and working time without interruption.The housing of the shaft can match with a stabillizer with different models and sizes.
1. Pioneer manufacturer
2. Headmost introduction
3. Continuous development
Technical characteristics
Model Illustration :
C5 LZ 172*7.0 II - D W FG
1 2345678 9 10
1. Type of power section
(C--Extended power section.D--Short power section.K--Air or foam power section.Omitted--Normal power section)
2. Lobes of rotor
3. Product code
4. Size(OD.mm)
5. Max.Pressure drop of bit nozzle
6. Design change code(I.II.III----)
7. Bent sub and bent housing
D--single bent(bent sub or bent housing)
P--bent sub and bent housing in same direction
T--double bent housing in same direction
S--double bent housing in two directions opposite to each other
J--gemel motor
K--adjustable bent housing
Omitted--straight motor
8. stabilizer(W--assembled with stabilizer;Omitted--no stabilizer)
9. hollowed rotor(F--hollowed rotor;Omitted--common rotor)
10. Heat-resistant performance(G--150'C;Omitted--120'C)

The product type and specific technical parameters can telephone consultation

Quality Drilling equipment DOWNHOLE MOTOR wholesale
Send your message to this supplier
To: Beijing Orichem International Co. Ltd.
Characters Remaining: (0/3000)
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly