IPX7-IPX8 IMMERSION PRESSURE TEST DEVICE(Model：SFT S2-1041A)

position：Products >> IPX1-8 Protection Against Water TestIPX1-8 Protection Against Water Test

IPX7-IPX8 IMMERSION PRESSURE TEST DEVICE (Model：SFT S2-1041A)
Application
IPX7 IMMERSION TANK is intended for testing protection against ingress of water, IPX7 ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time, and it is constructed in compliance with IEC 60529.
Immersion up to 1 m, 0.15m above top 1m above bottom, Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). Test duration: 30 minutes and Immersion at depth of 1m
IPX8 IMMERSION PRESSURE TEST DEVICE is intended for testing protection against ingress of water, IPX8 Immersion beyond 1 m, and the equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.
Test duration: continuous immersion in water; Depth specified by manufacturer
Conforms To
IEC60529, IEC60598-1, IEC 60335-1, IEC60745-1
Specifications
Pressurized container304 Stainless steel tanks, inner diameter 500mm , inner height 600mm (or other options)
Pressure adjustment range0.05-400KPA
Pressure deviceCompressed air (prepare by customer)
Pressure gauge precision 0.25 , range 0-6Bar /0-87PSI/0-0.6Mpa
Test time0-99min
The maximum limit pressureSafety pressure 800KPA
Pressure protectionpressure switch protection.
Test pressure range 1-30 meters or 1-50 meters depth adjustable,
And between water supply equipment using 3/4 " high pressure hose connection wire
Automatic pressure discharge function after the test is finished
Water column height can be observed (fit IPX7 test)
With a universal brake casters , easy move and fixed
Options: Cylinder (a set of two) :Automatic switch cover function
Outer Dimensions: W*D*H=800*600*1600MM
Weight100KG
Ordering Information
SFT S2-1041A IPX7-IPX8 IMMERSION PRESSURE TEST DEVICE—220V 50HZ or 115V 60 HZ
【Close】

Safequipment Limited is commended testing equipment supplier by IEC&IECEE.To provide the electronic & electrics and textile testing solution for industry. The equipment supplied by Safequipment Limited are widely used in electronic & electrics, lamp, wire & cable, textile, toys, automobile, petrochemical, pharmaceutical, paint & coating, and construction industries.

Safequipment Limited is fully compliance with international standards such as IEC, UL, ASTM, AATCC, SDC, ISO and BS etc. Company main products include E&E safety test equipment, Textile & Toy Flammability test equipment, IPXX Protection against Water test equipment etc.

Safequipment Limited has strong technical support team; we can provide technical support on many levels including Installation, warranty, maintenance and calibration.

Safequipment Limited, for Customer Supply Safety&Fit&Technical Test Solution.