Home > Ceilings >

JC-3000S Wall installed ultrasonic flowmeter

Country/Region china
Company JiechuangScience And Technology Co.,Ltd
Categories Ultrasonic Flow Meters
ICP License Issued by the Chinese Ministry
  • Product Details
  • Company Profile

JC-3000S Wall installed ultrasonic flowmeter

Welcome to use new generation transit-time ultrasonic flow meter, please read the user manual carefully before using. The wall-mount ultrasonic flow meter is designed to be installed in a fixed location for long-term flow measurement.


Linearity: 0.5%, Repeatability: 0.2%, Accuracy:±1%
Easy to operate.
Several type transducers for selection, measuring pipe size is from DN15mm to DN6000mm
Adopt low voltage, multi-pulse technology to improve accuracy, useful life and reliability.
Powerful Recording Function, record the totalizer data of the last 64 days/64 monthes/5 years.

Typical application

The wall-mounting flow meter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids
as well as liquid with small quantity of tiny particles.
Examples are:
Water (hot water, chilled water, city water, sea water, waste water, etc.);
Sewage with small particle content;
Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.);
Chemicals (alcohol, acids, etc.);
Plant effluent;
Beverage, liquid food;
Ultra-pure liquids;
Solvents and other liquids


Main unitAccuracyBetter than ±1%
RepeatabilityBetter than 0.2%
PrincipleTransit-time measuring principle
Display, velocity, time etc.
OutputAnalogue output: 4-20mA or 0-20mA current output. Impedance 01kW. Accuracy 0.1%.
OCT output: Frequency signal (1~9999HZ)
Relay output: over 20 source signal (no signal, reverse flow etc.)
RS485 serial port
InputThree analogue input
Three-wire PT100 resistor input (optional)
Other functionsAutomatically record the totaliser data of the last 64 days / 64 months / 5 years;
The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual
or automatic flow loss compensation
The instrument working status of the last 64 days
pipematerialSteel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed
Straight pipe sectionIn the upstream it must be beyond 10D, in the downstream it must be beyond 5D, in the upstream
the length must be beyond 30D from the access of the pump. (D stands for pipe diameter)
LiquidTypesWater, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can
transmit ultrasonic single uniform liquid
TemperatureStandard: -30C - 90C High-temperature:-30C - 160C
TurbidityLess than 10000ppm, with a little bubble
Flow DirectionBi-directional measuring, net flow/heat measuring
EnvironmentTemperatureMain Unit: -30C - 80C
Transducer: -40℃ -110℃, Temperature transducer: select on enquiry
HumidityMain Unit: 85% RH
Transducer: water-immersible, water depth less than 3m
CableTwisted Pair Line, standard length of 20m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement.
RS-485 interface, transmission distance up to 1000m
Power SupplyAC220V or DC24V
Power ConsumptionLess than 1.5W
ProtocolsMODBUS, M-BUS, Fuji extended protocol and other factory protocol

Quality JC-3000S Wall installed ultrasonic flowmeter wholesale
Send your message to this supplier
Enter your email please.
To: JiechuangScience And Technology Co.,Ltd
Characters Remaining: (0/3000)
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly