Home > Furniture Paint >

Seal-Once Multi Surface Industrial Concentrate

Country/Region china
Company Seal-Once Technology (Zhuhai) Co., Ltd
Categories All Purpose Cleaner
Telephone +86 756 3899822
ICP License Issued by the Chinese Ministry
  • Product Details
  • Company Profile

Seal-Once Multi Surface Industrial Concentrate

Home / Contact
  • Call us: +86 756 3899822
  • Home
  • About Us
  • Waterproofers
  • Cleaners
  • TechnicalInfo
  • Media
  • Agent
  • Contact
[Go to...]

Waterproofers - Industrial Multi-Surface Sealers

Seal-Once Multi Surface Industrial Concentrate

Seal-Once Advanced Multi-Surface Waterproofer is a is a concentrated, waterbased formula designed for waterproofing wood, composite wood, concrete and masonry. Eco-friendly Seal-Once is designed to be diluted with clean water at a 1:1 ratio for easy application.
Allow pressure-treated wood to age up to 3 to 6 months before applying Seal-Once. Not recommended for basement floors and walls subject to hydrostatic pressure (active leaks or continually damp areas).

Uses: Decks, Fences, Patios, Driveways, Brick, Green Concrete, Stucco, Limestone, Tile (unglazed), Slate and Gravestones, Log Homes, Cedar Shakes, Wood Siding, Clay Tile Roofs, Furniture, Planters and Raised Garden Beds.

CLEAR No. 7714 ONE U.S.GALLON / 3.79L

  • Non-toxic, Zero VOC’s, Safe for the Environment
  • Long-Lasting, Deep Penetrating Bond Protects Against Mold and Mildew
  • Waterproofs, Reduces Mold and Mildew
  • Outperforms All Other Sealers and Stains
  • UV Stable
  • Water-Based, Odorless, Non-Flammable, Non-Combustible
  • Will Not Burn Skin
  • Paintable, Stainable, Breathable
  • Will Not Harm Plants, Animals or Humans
  • Clear Formula Will Not Discolor Surface
  • Helps Prevent Wood From Cracking, Splitting and Warping
  • Reduces Corrosion, Spalling and Cracks Caused by Moisture
  • Helps Protect Against De-icing Salts and Pool Chemicals
  • Semi-TransparentTints Available
  • Non-Film Forming
  • Easy Soap & Water Clean Up


All surfaces should be cleaned before sealing for best penetration and performance of a coating. Remove algae, grime or mildew with New Image Coatings All Wood Cleaner. Pressure washing is recommended.

After cleaning, test absorbency of wood by sprinkling a few drops of water on the surface. If the water does not readily penetrate the surface, stripping will be necessary to remove old coatings prior to applying product. (Sanding or removal of paint containing lead may be hazardous. Call 1-800-424-LEAD for details.)


  • Do not use if air or surface temperature is below 35°F.
  • Do not apply in rain or when rain is imminent.
  • DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.Apply two coats, wet on damp, with a brush, pump-up garden sprayer,air-assisted and/or airless sprayer.
  • Use medium to coarse spray pattern. Brush out any puddles.
  • For best results, apply in the shade and out of direct sunlight.
  • When applying in direct sunlight and wood is hot, spray with a mist ofwater and apply Seal-Once immediately on dampened surface.
  • Apply to all wood surfaces and ends.
  • Do not use with other waterproofing products.
  • On very porous, aged wood an additional third coat may be necessary.
  • Wood can be painted or stained within 24 hours after Seal-Once isapplied.
  • Approximate coverage 200-300 square feet per gallon, per coat. Actualcoverage will vary due to porosity of wood.

Drying Time / Clean Up

Allow water to evaporate before subjecting surface to light foot traffic. Depending on temperature 2-3 hours is sufficient. In most cases you can apply in the morning and have a barbeque in the evening.
Clean equipment and brushes with warm, soapy water. Store unused product above 32°F, protect from freezing.

Safety Precaution

Contains No Toxic or Hazardous Materials
Seal-Once is a minor irritant to eyes, skin, inhalation and ingestion.

  • If splashed onto eyes, rinse with plenty of clean water for 15 minutes.
  • If inhalation irritate mucous membranes, move to fresh air.
  • If splashed onto skin, wash with soap and water.
  • If accidentally ingested, drink two glasses of water and refer to medicalpersonnel. Do not induce vomiting.

Sanding or removal of paint containing lead may be hazardous. Call 1-800 424-LEAD for details.
Manufacturer’s responsibility is limited to the purchase price of this product.

Featured Product

  • Seal-OnceWaterproofer Total Wood Protection
Quality Seal-Once Multi Surface Industrial Concentrate wholesale
Send your message to this supplier
*To: Seal-Once Technology (Zhuhai) Co., Ltd
Characters Remaining: (0/3000)
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly