Home > LED Professional Lighting >

Artemis 2 LED Aquarium Light

  • Product Details
  • Company Profile

Artemis 2 LED Aquarium Light

Unique innovative ideas:


III. High quality 3W LED+700mAcurrent=The top performance


700 mA is the best drive current for 3W LEDs,runing LEDs with possibly high current can take full advantage of LEDs, making your initial investment in LED devices to be well worth it.However, LEDs and LED drivers should be of superior quality as so to undertake the high electric current, besides the entire equipment should be good enough in heat dissipating to bear all the heat emitted by 3w leds.Selects the finest LEDs and drivers to ensure the stable performance as well as the long life span of the fixtures,our three-year warranty policy proves our confidence in products.

IV. Modularity design


Modularity design, each part interconnect by the male female plug directly, very easy for repairment and maintenance, only few steps to assemble up the whole fixture.


V. RTPM intelligent control system(Remote,Dimming,Timing and Temperature control)


RTPM is a multifunction intelligent system, including remote, dimming, timing, custom temperature control and mult-unit chaining function. In order to meet the growth demand of all kinds plants, the users can choose various different lighting effect scheme.

1,Remote-controlled, dimming and timing

There are three controllable circuits in the light, the brightness value is 0%-100%, in order to add and reduce the adjustable brightness , 1% or 10% is available, also, 1% is allowed to adjust the brightness in the single circuit. Four time bucket can be set on brightness in each circuit. In the right system time setting circumatances, when the time reach timing time bucket, the hole light will turn into the timing preinstall brightness automatic.,24 hours continuous cycle.(Please see the remote operation instruction manual )

2,Temperature control and protection

When the heat sink temperature over 65℃, the intelligent temperature control will cut off the power supply system automatic. The system will outo star when the temperature cooling to 50°.

3,Data memory

The brightness and timing setting will auto-save after setting 45 seconds, the lamp will enter the setting brightness condition last time when it electrify and get to work next time. The system time will keep the clock continuous operation about 3 months after the lamp completely without electricity, the built-in superbattery will be full charged within 20 seconds. Also, it without needing battery replacements.


Specification

Name

Artemis 2

Actual power

55~75W

Model

CDL-A-Artemis 2

LED Qty

24pcs*3W

Input voltage

AC100~240V

LED color

White(12000k)/Blue(460nm)

Output voltage

DC32~45V

Lifespan

50,000 Hours

Input current

700mA

Brightness value

0%~100%

Low voltage impulse

400us

PF

0.9

Control system

RTPM

Working frequency

50~60Hz

Circuits

2

Working environment

-20~40℃,45%~95%RH

Product size

290*170*68mm

N.W.

2.3kg

Inner carton size

380*220*120mm

G.W.(Inner carton )

2.7kg

Outer carton size

390*450*250mm/2pcs

G.W.(Outer carton )

11kg

Standard configuration

LED Light x1,Remote control x1,Power line x1,Chaining x2,Remote control operating instruction x1

Remarks

The above parameter is based on White:Blue=1:1, for reference only


Illumination and PAR value data sheet

Height(cm)

20

40

60

80

100

150

200

PAR (umol m-2s-l)

1550

413

190

111

71

30

16

Illumination(lux)

61000

18750

8720

5080

3220

1430

796

Irradiation Area()

0.28

0.38

0.79

1.13

1.54

2.54

4.52

(Remarks: the irradiation area is base on PAR value>10 )

Characteristics:

1. Use high quality LED lighting source, the lifespan is up to 50000 hours.

2. Replace 3~5 times of the HPSL power, 80% electric energy saving than the tradition HPSL and MHL.

3. High lighting effect, 90% of the light will be absorbed by the aquatic plant, but to the traditional HPSL and MHL, the lighting effect is just 8%~10%.

4. The input voltage is AC100V~240V,suitable for the world standard. Built-in power supply. No need other equipment, just access AC100~240V voltage from the plug, the lamp will be working smoothly, don't need the reflector and ballast either.

5. Revolutionary heat dissipation design, availably alleviate the internal thermal cycle, 10-15℃ lower than its precursor in performance.

6. Intelligent monitor system, ensure the whole equipment in a good working state.

7. Using advanced isolated power driver, UL standard output voltage which is lower than 45V DC.Soft starting protection to avoid the transient currents impact, effectively protecting the LEDs from high voltage damage.

8. Aluminium face shield design, housing available for various colors.

9. New product is lighter and more convenient for shipping,modular assembling very convenient for maintaining.

10. Modular assembling, no glue and glass design, very easy for repairment and maintenance.

11. New technology in fans will be more long-lasting,decreasing 50% noise.

12. Built with optical lenses, the penetration is more outstanding.,can be as much as 10-15 times powerful,available four options of lenses(90 degree,120 degree).

13. The lighting area and the height are changeable according to different plants and environments, the same as the parameter .

14. Environment-friendly, no mercury and other harmful heavy metal.

15. Appearance features are also can be customer design,available shell colors:red,black,white.Face shield colors:red,black,silver,blue.Vents colors:red,black,ivory white,grey.

16. Customers can choose different ratios, Our suggestion is white: blue=1:1, the common temperature of the white is 12000~14000K or 6500K, the wavelength of the blue is 460-470nm. The mixed light of red, blue, orange, yellow, UV, IR and white provide the hydrophyte needed light spectrum.The white LED colour temperature for the fresh water tank is 6500K, 12000-14000K for the salty water, the blue light are good for the growth of hydrophyte, customers also can choose the more suitable wavelength and LED colors.

Application:

Ideal for all the aquatic organisms, use the blue lights at night, can appear the fluorescence colour of the corals and the software fish, more gorgeous and bright-coloured, stronger penetration and the best ornamental effects.

Attention:

1. In order to save energy, please turn off the power if not use the lamp in a long time.

2. Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture.

3. The working environment for the light is -20~40℃,45%RH~90%RH.

4. To protect the light, Pls cut off the power when there is a lightning strike.

5. Don’t touch or move when the light working.

6. The above parameters are according to the conventional ratio(White:blue=1:2), customers can choose different ratio according to different require.


Quality Artemis 2 LED Aquarium Light wholesale
Send your message to this supplier
 
From:
To: Yomaris International Co.,Limited
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly