Home > Flavour & Fragrance >

Dustproof High Hardness Floor Coatings , Nano Densifier For Concrete Floors

Categories High Hardness Floor Coatings
Model Number: WL-0170
Certification: ISO9001
Place of Origin: china
MOQ: 5000KG
Payment Terms: L/C, T/T
Supply Ability: 500t/month
Delivery Time: 14 work days
Packaging Details: 200kg/drum
Brand Name: WeiLi Resin®
Price: Negotiable
Usage amount: 0.24-0.4kg/m²
Curing time: >24hours
Package: 50kg/200kg
Shelf life: 2years
Appearance: milky white
density(g/cm³): 1.04
  • Product Details
  • Company Profile

Dustproof High Hardness Floor Coatings , Nano Densifier For Concrete Floors

ANTI-DUSTING NANO CONCRETE DENSIFIER WL-0170

Because of being used too frequently, inadequate material choice while construction, and the poor quality control of construction, it is quiet easy for the concrete floor, the carborundum abrasion-resistant floor, the terrazzo floor, and the epoxy floor to get the problem of cracking and dusting on the surface of the floor, the breakup of the expansion joint, the bulge of the toweling course, and the peeling of the coating; moreover, the frequent use of fork lifts and cranes increases the damage of the concrete floor and produces the dust which might make the facilities get damaged more quickly so as to affect the quality of the products and reduce the working efficiency. Baiscally, the floor with dusting problem can be divided as listed below according to its level of severity:
1. Only dust appeared on the ground
2. Dust and sand appeared on the ground
3. Lots of dust appeared and the aggregates revealed on the ground

WL-0170 is the densifier which can inflitrate into the concrete and create the sealing entity with high density by the chemical reaction with the concrete, which can have the concrete get the effect of hardening, abrasion-resistance, and high-gloss by enhancing the hardness of the concrete floor. You can apply it on the concrete floor according to the client’s needs or use it to renovate the existing concrete floor with bad condition so as to make the concrete floor get the effect of anti-dusting, abrasion-proof, water-proof, and nonslip. WL-0170, the anti-dusting nano concreter densifier, is specially designed and developed for the existing old concrete floor which is easy to get dusting and has the problem of abrasion-proof. WL-0170 is easy to construct; meanwhile, it won’t damage the original exsiting floor itself.


Advantages

● Excellent permeability: WL-0170 can inflitrate into the concrete about a depth of 5-10mm
● Efficiently enhance the hardness and abrasion-proof of the concrete
● Easy to construct
● Reduce the dusting of the concrete floor
● Make the floor more easily to clean
● Solvent-free
● Colorless and odorless
● Eco-friendly and won’t pollute the environment


Applicable Scopes

it is suitable to be applied on the substrate of the concrete floor, the carborundum abrasion-resistant floor, the terrazzo floor, and the epoxy floor such as the floor of warehouses, factories, shopping centers, parking lots, docks, airfield runways, and etc.


Storage Conditions

The storage days of the solution is 24 months from its manufacture date under the condition of its original sealed packaging. Please keep the solution in storage in a dry environment with the temperature within +5〫C to +30〫C, and keep it away from the frost.


The raw material amount of use

0.24-0.4 kg per layer for one square meters. This is just the theoretical estimate which doesn’t contain any additional materials used to fill the surface holes, to level the rough ground, or to make up any other consumption caused by the floor’s original disadvantageous conditions.


The construction plans of WL-0170 for the concrete floor

The surface of the base should be texture-exposed, clean, frost-proof, and without cement laitance, visible water, oil, grease, old coatings, particles, and dirt on the surface. (Make a trial in a small area first if you are in doubt.)

Clean the substrate
Clean up the surface of the concrete floor and fill up the pinholes on the concrete with sand grout.

Level the ground
Use the grinding machine installed with the metal grinding pad to grind the floor.

Spray WL-0170
Spray 0.24-0.4 Kg of WL-0170 for 1 square meters. It depends on the severity level of the dusting of the concrete floor to decide let it dry in room temperature for 24-72 hours. The concrete floor treated with WL-0170 can allow pedestrians walk on it after it gets dried.

Polish the ground
Use the polishing machine installed with polishing buffer pad to polish the concrete.

Burnish the ground
Use the burnishing machine in combination with the sealer to burnish the floor.


The construction plans of WL-0170 for the other types of floor

Clean the substrate
Clean up the surface of the concrete floor and fill up the pinholes on the concrete with sand grout.

Level the ground
Use the grinding machine installed with the metal grinding pad to grind the floor.

Spray WL-0170
Spray 0.24-0.4 Kg of WL-0170 for 1 square meters. It depends on the severity level of the dusting of the concrete floor to decide let it dry in room temperature for 24-72 hours. The concrete floor treated with WL-0170 can allow pedestrians walk on it after it gets dried.

Seal the surface
Use the sealer to seal the surface.

Curing Time
It must wait for at least 24 hours after applying WL-0170 on the concrete floor for the next construction procedure.

Quality Dustproof High Hardness Floor Coatings , Nano Densifier For Concrete Floors wholesale
Send your message to this supplier
 
*From:
*To: Xiamen WangQin Chemical Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly