AC DC Electronic Test Equipment Calibration Programmable Standard Power Source

AC DC Electronic Test Equipment Calibration Programmable Standard Power Source

Multifunction Electrical Calibrator Overview

Multifunction Electrical Calibrator is a new generation of high-precision standard power source based on 1.2 G MAC DSP, large-scale FPGA, high-speed and high-precision DA and high-fidelity power amplifier. Applicable to electric power system, electric power, remote control, dispatching and other power departments and enterprises that need measurement, inspection and high-precision standard signal sources. It is also suitable for other occasions where high-precision standard signal sources are required for measurement and inspection.

Multifunction Electrical Calibrator can output high-precision voltage and current with adjustable frequency, phase and amplitude at power frequency (40Hz~65Hz). It is a highly accurate adjustable voltage and current standard source. The XL-803 can output very pure sinusoidal voltage current with a distortion of no more than 0.1%, typically 0.03%. The XL-803's voltage and current outputs have very high output stability, typically 0.004% RD. Therefore, it is very suitable for work situations requiring high-precision inspection and calibration, such as the measurement department for the detection of various voltage, current, power and other electrical parameter meters.

Multifunction Electrical Calibrator Main features and functions

1. Main features
1) It is possible to output a pure sinusoidal power signal with a distortion of 0.03% (typical).
2) Each harmonic output can be superimposed on the fundamental wave.
3) The frequency output can be adjusted from 40Hz to 65Hz, the resolution is 0.002Hz, and the accuracy is 0.002Hz.
4) The AB phase is a frequency reference, and the C phase is a separate frequency reference, so it can be phase-separated.
5) The phase 0~360 degrees can be adjusted arbitrarily, which can easily simulate various power supply situations and even reverse power transmission.
6) Strong load capacity, can carry capacitive, inductive, resistive load or composite type load, and the load regulation rate is better than 0.01% RG.
7) Excellent temperature stability, the core device is a military grade product with a temperature coefficient as small as 1PPM, which can guarantee the output precision in the outdoor temperature environment.
8) It is powerful and flexible with 32-bit MCU+DSP processor.
9) The waveform of the power frequency is up to 50,000 points per week, and the internal signal output does not need a filter for smooth filtering, which ensures the accurate output of the waveform, so that the system can output accurate harmonics, and the system has excellent harmonic distortion. index.

Main Specifications

1. AC voltage output
Adjustment fineness 0.01% RG
Accuracy is better than ±0.05% RG
Stability is better than ±0.01% RG/1min
Distortion better than 0.1% (non-capacitive load)
Output power rated at 25VA per phase
Full load regulation is less than ±0.01% RG
Full load adjustment time is less than 1mS
Output range 0V～420V
Gear setting 0V～130V, 130V～280V, 280V～420V
Temperature drift ±8PPM/°C
Long-term stability 60PPM/year
2. AC current output
Adjustment fineness 0.01% RG
Accuracy is better than ±0.05% RG
Stability is better than ±0.01% RG/1min
Distortion better than 0.1% (non-capacitive load)
Output power rated at 25VA per phase
Full load regulation is less than ±0.01% RG
Full load adjustment time is less than 1mS
Output range 0A～10A(20A)
Gear setting 0A～0.2A, 0.2A～1A, 1A～6A, 6A～10A(20A)
Temperature drift ±8PPM/°C
Long-term stability 60PPM/year

About US

- SYN is a technology started the company, our unremitting pursuit of technology embodied in products of excellent performance, company's substation intelligent test series products has 26 provinces in the country get successful application, and successfully applied to the "China Electric Power Research Institute (EPRI)", "Chinese Academy", "national high voltage metering station" national level institutions.

The company established a complete quality control system and after-sales service system, as of the end of 2014 the company engineering staff has been involved in the testing of more than 100 National Smart substations, for users to solve a lot of technical problems.

Shenzhen Xinglong Technology Co., Ltd. was established in 2004, is located in the Nanshan District, Shenzhen high tech Industrial Park, is a professional engaged in the Smart Substation detection equipment R & D, production and sales of national key high-tech enterprise (certificate number: GF201244200546). Attention to intelligence (in the field of digital substation testing technology research, from the beginning of 2009 will be gradually introduced various types of testing equipment, including electronic transformer calibrator, digital electric energy meter calibrator (check), with unit testing instrument, and wisdom to substation field testing and acceptance of the project provides the means and tools. Companies actively involved in the development of a number of national standards, to help power companies to solve some of the problems in the field of intelligent substation testing industry technology.

- SYN is a technology started the company, our unremitting pursuit of technology embodied in products of excellent performance, company's substation intelligent test series products has 26 provinces in the country get successful application, and successfully applied to the "China Electric Power Research Institute (EPRI)", "Chinese Academy", "national high voltage metering station" national level institutions.

The company established a complete quality control system and after-sales service system, as of the end of 2014 the company engineering staff has been involved in the testing of more than 100 National Smart substations, for users to solve a lot of technical problems.

Company has won 7 provincial and ministerial science and technology award, the product has laid a good reputation in the industry.

2014 August Xinglong technology successfully in the shares of small and medium-sized enterprises transfer system (the new board) listing (Stock Code: 830924 and become a public company.

Syn can not develop without the support from all sectors of society, we warmly welcome domestic and foreign customers, agents, investors and our sincere cooperation, common development. The future of the company will be with the national system for the transfer of shares in the capital market platform, efforts to technology upgrades and new product research and development, with three to five years to intelligent substation test products to cover all aspects of the smart substation. Strive to become a benchmark for the field of intelligent substation testing business, for the construction and development of China's smart grid to contribute their own diligence and wisdom.