Home > Zinc >

Hot Rolled 301 custom Mirror Finish Stainless Steel Sheet 3/4 hardness

Categories Stainless Steel Sheet
Brand Name: BAOSTEEL
Model Number: 300series
Certification: SGS, ISO
Place of Origin: China ,Jiangsu
MOQ: 1ton
Price: USD 500-4000 per ton
Payment Terms: L/C, T/T, Western Union
Delivery Time: within 10 days after received the payment
Packaging Details: standard seaworthy packaging/ as per buyer's request
Thickness: 0.4-3MM
Width: 1000-1200MM
Length: as per buyer's request
  • Product Details
  • Company Profile

Hot Rolled 301 custom Mirror Finish Stainless Steel Sheet 3/4 hardness

Stainless Steel - Grade 304

Background

Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

Key Properties

These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.

Composition

Typical compositional ranges for grade 304 stainless steels are given in table 1.

Table 1. Composition ranges for 304 grade stainless steel

GradeCMnSiPSCrMoNiN
304

min.

max.

-

0.08

-

2.0

-

0.75

-

0.045

-

0.030

18.0

20.0

-

8.0

10.5

-

0.10

304L

min.

max.

-

0.030

-

2.0

-

0.75

-

0.045

-

0.030

18.0

20.0

-

8.0

12.0

-

0.10

304H

min.

max.

0.04

0.10

-

2.0

-

0.75

-0.045

-

0.030

18.0

20.0

-

8.0

10.5

-

Mechanical Properties

Typical mechanical properties for grade 304 stainless steels are given in table 2.

Table 2. Mechanical properties of 304 grade stainless steel

GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardness
Rockwell B (HR B) maxBrinell (HB) max
3045152054092201
304L4851704092201
304H5152054092201
304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical Properties

Typical physical properties for annealed grade 304 stainless steels are given in table 3.

Table 3. Physical properties of 304 grade stainless steel in the annealed condition

GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (mm/m/°C)Thermal Conductivity (W/m.K)Specific Heat 0-100°C (J/kg.K)
0-100°C0-315°C0-538°C0-649°Cat 100°Cat 500°C
304/L/H800019317.217.818.418.716.221.5500

Electrical Resistivity (nW.m)

Magnetic Permeability, H = 200

Oersteds, Annealed

Melting Range


7201.02 max.1399-1454 (°C)

Grade Specification Comparison

Approximate grade comparisons for 304 stainless steels are given in table 4.

Table 4. Grade specifications for 304 grade stainless steel

GradeUNS NoOld BritishEuronormSwedish SSJapanese JIS
BSEnNoName
304S30400304S3158E1.4301X5CrNi18-102332SUS 304
304LS30403304S11-1.4306X2CrNi19-112352SUS 304L
304HS30409304S51-1.4948X6CrNi18-11--
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible Alternative Grades

Possible alternative grades to grade 304 stainless steels are given in table 5.

Table 5. Possible alternative grades to 304 grade stainless steel

GradeWhy it might be chosen instead of 304
301LA higher work hardening rate grade is required for certain roll formed or stretch formed components.
302HQLower work hardening rate is needed for cold forging of screws, bolts and rivets.
303Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable.
316Higher resistance to pitting and crevice corrosion is required, in chloride environments
321Better resistance to temperatures of around 600-900°C is needed…321 has higher hot strength.
3CR12A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable.
430A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable.

Corrosion Resistance

Excellent in a wide range of atmospheric environments and many corrosive media. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60°C. Considered resistant to potable water with up to about 200mg/L chlorides at ambient temperatures, reducing to about 150mg/L at 60°C.

Nitric AcidGoodSulfuric AcidModerate
Phosphoric AcidModerateAcetic AcidModerate
Sodium HydroxideModerateSalt Spray (NaCl)Good
Sea WaterRestrictedSour Oil/GasModerate
HumidityExcellent

Heat Resistance

Good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C. Continuous use of 304 in the 425-860°C range is not recommended if subsequent aqueous corrosion resistance is important. Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.

Grade 304H has higher strength at elevated temperatures so is often used for structural and pressure-containing applications at temperatures above about 500°C and up to about 800°C. 304H will become sensitised in the temperature range of 425-860°C; this is not a problem for high temperature applications, but will result in reduced aqueous corrosion resistance.


Heat Treatment

Solution Treatment (Annealing) - Heat to 1010-1120°C and cool rapidly. These grades cannot be hardened by thermal treatment.

Stress Relief Annealing: Cold worked parts should be stress relieved at 750°F (399°C) for 1/2to 2 hours.

Welding

Excellent weldability by all standard fusion methods, both with and without filler metals. AS 1554.6 pre-qualifies welding of 304 with Grade 308 and 304L with 308L rods or electrodes (and with their high silicon equivalents). Heavy welded sections in Grade 304 may require post-weld annealing for maximum corrosion resistance. This is not required for Grade 304L. Grade 321 may also be used as an alternative to 304 if heavy section welding is required and post-weld heat treatment is not possible.

Machining

A "Ugima" improved machinability version of grade 304 is available in bar products. "Ugima" machines significantly better than standard 304 or 304L, giving higher machining rates and lower tool wear in many operations.

Dual Certification

It is common for 304 and 304L to be stocked in "Dual Certified" form, particularly in plate and pipe. These items have chemical and mechanical properties complying with both 304 and 304L specifications. Such dual certified product does not meet 304H specifications and may be unacceptable for high temperature applications.

Applications

Typical applications include:

  • Food processing equipment, particularly in beer brewing, milk processing & wine making.
  • Kitchen benches, sinks, troughs, equipment and appliances
  • Architectural panelling, railings & trim
  • Chemical containers, including for transport
  • Heat Exchangers
  • Woven or welded screens for mining, quarrying & water filtration
  • Threaded fasteners
  • Springs
Quality Hot Rolled 301 custom Mirror Finish Stainless Steel Sheet 3/4 hardness wholesale
Send your message to this supplier
 
*From:
*To: JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly