5.95m Length PVC Wall Panels With Long Working Life 200 × 7mm
PVC Wall Panel Specification:
|20cm * 7mm|
|usuall be 5.8m or 5.95m|
|1.9-2.3kg per sqm|
|packed with PE film, and each 10pieces will be put into one pack|
PVC Wall Panel Benefits
1. Ideal replacement for conventional ceiling and wall systems
2. Cost effective compared to other building materials
3. Resistant to most chemicals
4. High strength to different weight ratio
5. Lightweight, easy to transport
6. Maintenance is almost free – just wipe it clean
7. B1 level fire rating
PVC Wall Panel Parameter Data And Others:
Noise reduction coefficient
|Class B1 Meet the standard GB8624-1997|
|Tolerance||Length <±1mm, width < ±1mm, thickness <±0.5mm|
Sagging resistance prosperities
|Warranty against visible sag|
|Resistant to 95% humidity and standing water|
Percent of pvc
|Ceiling of Office, Hotel, Household, Dust Free Room etc.|
|Environmental friendly, Artistic|
Note: color, design, and package could be supplied by customer’s
PVC Wall Panel Installation:
1. Clean the surface of ceiling.
2. Nail wooden or steel battens(20mm - 30mm thick) into the wall
and ceiling, with all the corners firstly, then on the plane with
the distance of 400mm away between every wooden batten.
3. Screw PVC profiles(cornices) on all the corners, then insert the
panel into the corner profiles, then the folling panel into the
4. Screw PVC second panel's notch side into the wooden or steel
battens, then insert the third panel, then the fourth, and nail the
fourth's notch side, then fifth and sixth, then...
5. Attention for the distance and notch side panel: for the ways
above is based on 250mm or 300mm wide panels, and wooden or steel
battens between distance is 400mm, so every 2 panel, screw the
second notch. Surely you could change the ways as per your
situation presently, by way of changing the distance of the panels
and the wooden or stell battens.
How to Choose PVC Wall Panel:
The surface should be even and beautiful. Color and pattern should
be in harmony with where to decoration. Panels with bright and
single color and clean pattern are better for ceiling usage.
B. Checking the tongue and groove
The cut of panel looks like honey comb. It should be clear and
sharp. Tongue and groove is on the two sides of nished panels. When
install the tongue into the groove, no gap is allowed, and the
surface should be even as one complete panel. If installing is not
easy, the panels are surely of poor quality.
PVC Wall Panel Application:
PVC Panels for wall and ceiling is great for carport, garages,
under eaves, bathrooms, living room, laundry room, kitchen and much
more. PVC panels are perfect for areas with moisture issues. It is
also great for areas where you just need to quickly spruce up, as
you can fix the panel on any surface. You no longer need to remove
old wall paper or old wall tiles to revitalize a room. You can now
clad over the old ugly wall or ceiling with our PVC panels.
A lot of people are worried about the smell of PVC panel, in the
fact if you choose regular factory of the PVC panel, it is
non-toxic and tasteless, no stimulation to the skin and respiratory
system, for those of timber and paint allergic people, PVC panel is
very suitable to use in the home or public place.
PVC Wall Panel Color Showing: