6mm (236mil) Thickness Multi Layers Sound Deadening Material With
Strong Self Adhesives
|Alumnium Color :||Blue : Golden ; Silver ; Black|
|Raw Material :||Self-adhesive butyl; Aluminum Foil,High Quality Bitumen|
|Butyl rubber Color :||Black ; White ; Grey|
|Release Paper :||Yellow ; White ; Brown|
|Thickness :||6mm, 236mil(Accept customization)|
500m x 800 mm;
19”x31.5" ( Accept customization )
|Services life :||8 years|
|Speaker Kits||Speaker Kits : 2 pcs / pack ; 40 packs / Carton|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
|Bulk Kits||9 / 10 pcs / Pack ; 2 packs / Carton|
|Normal Packaging||20 pcs / Carton|
ZZ-07 Sound Deadening Material contain Aluminum Foil Faced, High
Quality Bitumen, Butyl Rubber Based and Releasing Liner which is an
enhanced material for high performance of vibration damping and
Logo printing on sheet foil faced is accepted in one or two color.
ZZ-07 Sound Deadening Material eliminate or reduces the vibration
of metal sheets
The material is available in 460 x 800 mm x 6mm (18" x 31.5", 236
mil),size can be OEM.
This deadening material can cut or die cut into suitable size to
meet the customer’s requirements.
It contain Self Adhesive only on one side which is protected by an
easily strippable release liner.
The Self Adhesive is in very high-tack which let the installation
easily and high performance for the vibration damping.
Flexible,high-tick,easy to install
Increases SPL – The use of our sound deadening material will not
only make your sound more clear and eliminate distortion but it
will make your music louder by
Eliminates sound leakage!
Improves Bass Quality and Reduces Bass Distortion
Kill unwanted noise, rattles, vibrations
Reduce exhaust and engine noise
Temperature range of -60 degree ~160 degree
Butyl Sound Deadening Material is suitable in applications where it
is need to dampen or eliminate the noise from the metal panel
Sound Deadening Material should be applied to a clean dry or
painted surface at room temperature with a hand roller to ensure
It can be die cut to shape and placed onto the body surface
directly on painted panels or after the sheet metal.
Typical applications include:
• Bodies, doors, firewalls, and floors of trucks, buses, car, and
• Metal office furniture
• Sinks, bathtubs, and shower stalls
• Air Conditioners
• Appliance cabinets
• Rapid transit or railway cars
• Recreational vehicles
• Chutes, bins, & hoppers
• Motor and transformer housings
• Machine housing belt guards
• Sheet metal ducts, mixing boxes, and terminal Units
For Auto ,noise mainly from engine, car body structure, road, wind
and wheel so this Sound Deadening Material suitable for bodies, doors, firewalls, and floors.
Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner. Next, remove dust, grease,
moisture, and other foreign matter from the application surface.
Peel off the release liner.
The simplest application technique is to bend the mat slightly and
attach it along its shortest edge. Press the mat firmly into place,
using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity.
The temperature of the mat and application surface should not be
below room temperature during fitting. Heating the material is not
(Please note:working wolves should used during the deadener
insatllation since the sharp edge of foil)
Our products competitive
• Very flexible, easy-to-install, very high-strength adhesive butyl
• Fire proofing material
• Eliminate body/floor vibration
• Better audio sound quality
• Full car installation reduces unwanted noises 5-8 dB
• -60℃- 160℃
• Service life:7-8years
• Storge : above 500 days (Room temperature storage and stay away direct sunlight)