We are pioneer in Used Oil Re-Refining Plant Manufacturing,
Erection and Installation.
Lubricating oil after prolonged use in the engine’s crankcase gets
degraded due to oxidation, presence of water, carbon particles,
oxidation sludge etc. This oil, if not replace, will cause failure
of the engine. The disposal of used oil is a major environmental
problem unless it is processed safely as the indiscriminate
disposal will cause pollution to water bodies and land fillings.
The proposal is to manufacture petroleum lubricant oils and other
petroleum based products, from waste / used oils and manufacture of
lubricants to the specification required to satisfy the
International specifications.
I.Working principle
This equipment adopt physicochemical actions to
polymerize,passivate, absorb and eliminate impurities and harmful
contamination. We research a new chemical alkaline complex
catalyst, which can restore and regeneration the Waste oil to clean
oil, save the component of the oil.
II. Advantage:
It’s easy to produce waste residue and bad smelling by traditional
vitriol distilling, which will bring potential secondary pollution,
moreover, it’s easy to change the color to black and produce the
odor due to the recycled oil react with the oxygen. But after we
use the alkaline complex catalyst refines the oil, the recycled oil
havn’t change the color and havn’t create the odor. What’s more
important, you can use the resid to be as the fuel to heating the
oil, without any pollution. And the machine is easy to operate,
only 1-2 workers can control the machine.
III.Main components:
1. Catalyst system: Catalyst Reactor, blender;
2. Chemistry treatment systerm: Chemistry reactor, blender,oil pump
3. Heating distilling system: distilling tower, distilling kettle,
heater, circle pump;
4. Cooling system: refrigerating machine, water pump, water tank,
cooler I,cooler II, Condenser;
5. Vacuum system: Vacuum water receiver, vacuum pump, vacuum cooler
6. Degasification system: vacuum exhauster, exhaust fan,
degasification plant, water pump, radiator,deodorizer.
7. oil storage system: distilling storage tank
8. Control system: all kinds of gauge( vacuum gauge, pressure gauge
etc.) and electricity controller tank
IV. Features:
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary pollution.
3. The machine can recycle gasoline oil, diesel oil, engine oil,
rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by
oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less thanUS$30 to
refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
6. High degree of automation.