Home > Electronic Accessories & Supplies >

2 Phase Auto Voltage Regulator , 10 - 1600 KVA Electronic Voltage Stabilizer

Categories Automatic Voltage Stabilizer
Brand Name: HRD/MOTU
Model Number: GTZW-D
Place of Origin: China
Certification: CE
MOQ: 1PCS
Price: 200-5000usd/pcs
Packaging Details: standard for export
Payment Terms: L/C, T/T
Input Rated Voltage: FF208/220 Vac, FN 120/127 Vac
Input Frequency: 60HZ
Input breaker: Yes
Output Rated Voltage: Phase Voltage AC127V,Line Voltage AC220V
Output Accuracy: FF208/220 Vac+/-2%, FN 120/12Vac +/-2%
Response Time: ≤3ms
Type: Non-contact , Electronic
Color: Gray
  • Product Details
  • Company Profile

2 Phase Auto Voltage Regulator , 10 - 1600 KVA Electronic Voltage Stabilizer

GTZW-D10-1200KVA 2 Phase Digital Control Voltage Stabilizer Specifications


1. Working Environments

Usage:indoor,vibration-free & jolt, stabilizer no serious affection from insulation gas, steam, chemical deposition, dust, dirt and other bombings and corrosive medium.

Working Voltage: 220/127 or200/120 +/-30% ,50/60HZ

Working Environment Temperature:-15℃~+45℃

Altitude:≤3500m,

Relative Humidity :≤90%

Load Regulation + / 5%


Noise<9 DB1 Mt


Terminal block for adding phases


  1. Product Specification
PhaseModel

Capacity

(KVA)

Current(A)Size (mm)
W*S*G
Weight (kg)
2phaseGTZW-D101015350×600×750140
GTZW-D151522
GTZW-D202030160
GTZW-D303046180
GTZW-D454568390×650×870195
GTZW-D606090240
GTZW-D7575113460×650×1200316
GTZW-D100100152330
GTZW-D150150228700×700×1600450
GTZW-D200200300530
GTZW-D2502503421100×800×2100630
GTZW-D320320486720
GTZW-D400400608810
GTZW-D500500760910
GTZW-D6006009121050
GTZW-D80080012161800×1000×21001300
GTZW-D1000100015201650
GTZW-D1200120018241900
GTZW-D1600160024311800×1000×2100

3.Characteristics


v LCD Large-screen

Using large-screen LCD display, can shows dynamic display voltage, current, and all kinds of working condition.


v Product Characteristics

The speed of response time(regulating speed) is very fast, non-contact, anti-interference, no mechanical failure and wear of carbon brush, maintenance-free. Three-phase voltage regulating independently to ensure the balance of output voltage . Effectively protect the security of the precision equipment.


v Precision (output accuracy) Can Be Adjusted

All precision of the stabilizer is preset plus or minus 2 Volt. According to different load demand can be adjusted plus or minus 2 Volt, plus or minus 2 Volt.


v Manual Voltage Regulation

According to production requirement, within the scope of the 10% rated voltage value, the stabilizer can set voltage arbitrarily for different electrical equipment.


v Automatic Bypass Function

Equipped with automatic bypass function, when the stabilizer fails,it can turn into the mains automatically, no affection for the production.


v Output High and Low Voltage Protection Function

When monitoring circuit detect the output voltage beyond the upper or lower limit, voltage stabilizer can turn into the mains automatically, no affection for the production.


v Lack of Phase/Phase Fault Protection Function

When monitoring circuit detected phase failure, voltage regulator /stabilizer will cut off the output automatically and voice-alarm.


v Delay Stabilizing Output Voltage Function

Voltage Stabilizer boot or recover from a state of protection, would not be regulated immediately. But stay on only after users determine that the mains voltage are normal to ensure that the load equipment would not be damaged.


v Automatic Output Function

System preset is automatic output. When stabilizer connect to the mains, system detect that the power grid is normal, then it would delay < 3 ms, stabilizing output voltage automatically.


v Modular Design, Easy to Replace and Repair

Adopting modular design, regulating circuit and monitoring circuits independent to each other, all components are standard-normalization. Assembly, debugging, maintenance are more simple and quick.


v Strong Load/Carrying Capacity

When the short-time overload or short-circuit, the transformer would not be damaged to avoid coil burning fire. When overload 100%, stabilizer can withstand 15 min, 10 seconds for overload 500%.

  1. Main Technical Index
INPUTRated VoltageFF208/220 Vac, FN 120/127 Vac
Stabilized Voltage Range2P2W+G 220Vac +/- 30% (20-60%(customised avaiable)
Frequency60HZ
Input breakerYes
OUTPUTRated Voltage90.6/110/118/145.5 Vac, 157/220/236/252Vac
Center Voltage±7℅(can be adjusted)
Output AccuracyFF 208/220/221/ 236 Vac +/- 2 Volt, FN 110.5/118/120/127Vac +/- 5%
Response Time≤3ms
Power Factor0.9
Stabilization Time≤100ms/Step
THD< 1% (not produce additional waveform distortion)
Efficiency≥99℅
Load regulation+/- 1,5%
Two-phase Unbalance Factor2-phase voltage balance automatically, incrementation≤2%
Overload500% 10sg/ 100% 15min/ 50% 1 Hour/ 30% 2 Hour/ 10% continue
Connection way

Terminal block for adding phases


BreakerYes
PROTECTIONOver voltageWe accept the request
Under voltageWe accept the request
Phase LossYes,uninterrupted to bypass
Surge ProtectionYes
OverloadElectric detection, overload 1 minute, the output would be cut off.
Over-currentElectronic detection and circuit breaker dual protection.
Short CircuitElectronic detection and circuit breaker dual protection.
BypassManual bypass and automatic bypass.
INSTRUCTIONVoltageA,B,∑AB Two-phase shows respectively true and effective values
CurrentA,B,∑AB Two-phase shows respectively true and effective values
Working StateAVR/Bypass
AbnormalOver-voltage, under-voltage, over-load, fuse blowing
CONTROL MODEDSP operate metering chip intelligent control technology
WORKING MODEWith automatic voltage regulation and the bypass, two working mode.
VOLTAGE REGULATION MODE2-phase adjust voltage separately

OVERLOAD CAPACITY


500% for 10 Seconds

100% for 15 minutes

50% for 1 Hour

30% for 2 Hour

10% continue

MEASUREMENT TIME FOR CORRECTION8.33 Ms response 1.5 us (microseconds)
ISOLATION TRANSFORMERYes 1 for Phases

5.Main Material List

Material NameQuantityManufacturerIntroductions
ENCLOSURE1pcsHRD

Adopt 2.0 Thick Cold-Roll Steel Sheets.Surface treatment:G139→Phosphating+PZ660 powder+powder coating or electrostatic

(RAL7032)plastic spraying;

DISPLAY1pcsHRDAdopt STH wide angle LCD display,reading clearly;steroscopical and direct.
MAIN BOARD1pcsHRDDevelop PCB independently,stable circuitry;The main components adopt imported brand, like ”Infineon”, “ST”,“Fairchild”, “Toshiba”,etc.
SING PHASE COMPENSATING TRANSFORER2PCSHRDThrough secondary vacuum dipping, and continuously bake for 10 hours under the high temperature of 130 ℃.Transformer insulation class F, heat resistance 155 ℃. All the withstanding voltage are 3500V/5Ma/min;
THREE-PHASE REGULATING TRANSFORMER2PCSHRD
RELAY2PCSHRDAdopt domestic first-class brand,special customized for the Digital Control Voltage Stabilizer.

FUSE


2PCSMing RongAdopting domestic fuse, the first brand ”Ming Rong”company’s high quality products
INPUT SWITCH1PCSSHIHLIN

ABSORPTION

RESISTENCE

3PCSVILVA ELECTRONIC

Industrial-grade resistance stable and durable


durable


HYSTERESIS BETWEEN STEPS< 1%
COMMUTATIONRELAYS
TECHNOLOGYADDITION AND SUBTRACTION PHASOR
NUMBER TAPS6

6.Technology and Special Requirements

1.With output manual bypass switch;

2. Enclosure material:Baosteel(or Wuhan Iron and Steel Group Corp)2mm thick cold-roll steel sheets;

3.Surface Treatment:G139→Phosphating+PZ660 powder+powder coating(RAL7032);

4.Products manufacture in accordance with the law of the People's Republic of China industry standard ,Compensating AC Stabilizer Targets.

7.Technical Documents

Provide the complete technical file about the equipment :

A.1pcs The whole machine quality certification.

B.1pcs Product test report

C.1pcs User Manual

8.Quality Assurance and After-sales Service

1)Equipment warranty period is 2 years from the date of delivery;

2)During the warranty period,supplier offer technical support for free; When get the notice of the failure by the Party A, Party B should implement the warranty obligations; Reponse within 8 hours and the solution should be given without 24 hours to reduce the losses of Party A. If maintenance need other spare parts, Party B assist purchasing, installation and debugging, within 48 hours solve the problem.

3)After the warranty period, the supplier provide user with timely, high-quality, favorable technical service and supply spare parts.


9.LCD Display


10.Pictures


Quality 2 Phase Auto Voltage Regulator , 10 - 1600 KVA Electronic Voltage Stabilizer wholesale
Send your message to this supplier
 
*From:
*To: Shenzhen HRD SCI&TECH CO.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly