Green Fibre Faced Sound Deadening Material With Butyl Rubber Based
For Car Audio System
|Alumnium Color :||Silver|
|Raw Material :||1.5mm Thick Butyl; 0.05mm Foil; 15mm Thick Fibre|
|Butyl rubber Color :||Black|
|Fibre Color :||Green|
|Release Paper :||Yellow ; White ; Brown|
|Thickness :||17mm; 0.66"|
|Size :||460 mm X 800 mm; 18”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
|Bulk Kits||9 / 10 pcs / Pack ; 2 packs / Carton|
|Normal Packaging||20 pcs / Carton|
Structure: Non Woven polypropylene fiber+ foil + butyl rubber +releasing liner
ZZXY-12 Non Woven polypropylene fiber sound deadening material is the multi layers sound deadening material which is based on the
aluminum butyl rubber sound damping material.
It mainly used for vibration damping and sound deadening, reducing
car engine noise, wheel noise, road noise, wind noise ,improve car
audio sound quality.
Application area: door panel, under dash, floor, trunk and more
• Easy-to-install, very high-strength adhesive butyl
• Eliminate body/floor vibration
• Better audio sound quality
• Good to160℃
• Water proof, fire proof
It can be die cut to shape and placed onto the body surface
directly on painted panels or after the sheet metal is cleaned
before painting (typically at the sealer application operation). is
used to treat metal panels, partitions, ducts, doors, bins, panels,
and so forth in railroad cars, buses, automobiles, and ships.
It is also used for ventilation ducts, relay cabinets, steel
furniture, home appliances, sink units, computer equipment, machine
tools and many other objects that suffer from vibration-produced
1.Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner.
2.Remove dust, grease, moisture, and other foreign matter from the
3.Peel off the release liner. The simplest application technique is
to bend the mat slightly and attach it along its shortest edge.
4.Press the mat firmly into place, using a roller for larger
pieces. The roller reduces the risk of leaving air pockets, which
reduce sound damping capacity.
1.The temperature of the mat and application surface should not be
below room temperature during fitting.
2.No need hot gun.
3.Working gloves should be used during installation
Our products competitive
Improves Bass Quality and Reduces Bass Distortion
Kill unwanted noise, rattles, vibrations
Reduce exhaust and engine noise
Full car installation reduce noises 5-8 dB
Temperature range of -60 degree ~160 degree